Wall Mounted Dip Bars Klarfit FIT-BT7
Whether you are fortunate enough to have a home gym or not, even with a limited wall space you can use the Wall Mounted Dip Bars by Klarfit for an effective upper body workout.
Depending on the height you have available, the higher up the wall you can position the bars while still being able to perform dips comfortably, the better.
Because of the 150kg weight limit and the distance the dip bars extend from the wall once secured, the Wall Mounted Dip Bars can actually also be used for pull ups as well.
[one_half]Even with the thick padded arm rests there is still ample height in the vertical bars for holding onto when performing leg raises if you are looking to exercise your abdominal muscles.
The surface of the arm rests themselves is made of PVC leather which is abrasion resistant, easy to clean, and the optimal material for a workout device.
By using the vertical grips, the forearms are supported by cushions made of high density plastic that allow for low-impact movements.[/one_half]
[one_half_last]
[/one_half_last]
[divider]
[one_half]
Check the price[/button]
[/one_half]
[one_half_last]
[/one_half_last]
[divider]
[box type=”shadow” align=”aligncenter” width=”400″ ]
Wall Mounted Dip Bars Klarfit FIT-BT7 – Features Summary
[checklist]
- Abdominal dips trainer for efficient workout for arms, shoulders, back and abdominal muscles
- Steel rod
- Suitable for wall mounting – distance from wall 68.5 cm – ideal for a free workout
- Max. capacity up to 150kg – only suitable walls (concrete and stone walls)
- Rounded handles with plastic caps
[/checklist][/box]
[divider]
Wall Mounted Dip Bars vs. Free Standing Dip Bars
With almost any free standing dip and pull up station the bars are a fixed distance apart. This may not put all users in the most effective position for performing the dip and pull up exercises depending on their frame and how wide their shoulders are.
[one_half]With the Wall Mounted Dip Bars from Klarfit, you can position the bars at a distance that is most effective for you and puts you in the most natural position for the exercise.
Although the bars will need to be secured into a strong concrete wall, once this is done they have a recommended weight limit of 150kg. This is considerably more than most free standing dip and pull up stations and will be guaranteed not to move when performing the exercises.
Mounting hardware is included with the product.[/one_half]
[one_half_last]
[/one_half_last]
[divider]
Wall Mounted Dip Bars Klarfit FIT-BT7 Dimensions
[checklist]
- Vertical distance handles – wall: 40cm
- Padding: 30.5 x 14cm (W x D)
- Cushion thickness: 4cm
- Grip diameter: 4cm
- Horizontal length of the handles: 17.5 cm
- Length of the vertical handles: 18.5 cm
- Distance from wall: 68.5cm
- Wall plate: 10 x 20cm (W x H)
- Weight: about 2kg per rod
[/checklist]
[divider]
[two_third][review][/two_third]
[one_third_last]
[/one_third_last]
